Upgraded 5-in-1 Stud Finder with Smart Sensor, Audio Alarm, and HD LCD Display for Professionals

Revised Content:

AC Scan Detection: - Detection range up to 50 mm/2 inches - Multiple detection capabilities for more accurate location identification - Switching between detection units (cm/in/mm) is possible

Exact Mode (Wood): - Detection range up to 20 mm/0.8 inches - Long press to switch between exact mode and deep mode

Depth Mode (Wood): - Detection range up to 38 mm/1.5 inches - Wood detection mode can identify objects in plaster drywall, plywood sheathing, bare wood flooring, and coated wood walls

Metal Scan Detection: - Detects metal up to 120 mm/4.7 inches - Detects non-ferrous metals up to 100 mm/3.94 inches - Metal detection is displayed on the screen with the corresponding depth value

Easy to Use: 1. Calibration before scanning: - Short press the detection mode button and wait for automatic calibration - Choose the detection mode and depth, defaulting to metal mode

1. Scanning walls:
2. Move the scanner slowly along the wall, without lifting or applying additional pressure

3. Recalibrate if the instrument is shaken or lifted carelessly

4. Finding the center of the target:

5. The progress bar on the screen changes with the distance to the object
6. When the signal is full, the indicator light flashes, and a ticking sound is emitted, indicating the center of the object

Calibrating the Tool Correctly: - Short press the Power Button to enter the metal detection mode - In AC/Metal mode, calibrate by placing the tool in the air - In stud/deep mode, calibrate by placing the tool on the wall to be detected

Notes: - Automatic calibration may not work due to environmental factors, requiring manual calibration - If the tool was previously calibrated on a wooden stand, move it away from the stand before detecting the stand again - Erratic scan results may be caused by moisture, humidity, or recently applied paint/wallpaper - Wooden nails can be difficult to detect using the wood stud detection mode, so try the metal detection mode instead - The stud finder can also detect wires or pipes near the wall, so caution is advised when nailing, cutting, or drilling

Product Description: The HANMATEK stud finder is a professional wall scanner with 5 scanning functions: stud scan exact mode (0.8 inch/20 mm), stud scan deep mode (1.5 inch/38 mm), AC wires scan (2 inch/50 mm), ferrous metals scan (4.7 inch/12 cm), and non-ferrous metals scan (4 inch/10 cm). You can switch between these modes to find the edges and centers of nails, screws, rebar, wooden beams, and wires behind walls, floors, and ceilings.

The stud finder features an easy-to-read display that clearly shows the detection depth, signal strength, and other relevant information. It can be calibrated automatically by pressing the metal detection button, although manual calibration may be required in some cases.

The stud finder is designed for comfortable grip at any angle, with a rubber back to prevent wall damage. It also has an audible alarm (can be switched off) and 3-color indicator lights to help you identify the target. This versatile tool is perfect for various home improvement projects, helping you avoid hazards when installing TVs, cabinets, and more.

product information: